Deprecated: Creation of dynamic property RSS::$_date_published is deprecated in /mnt/vault/Sync/Dessol-Workings/Sites/hannants.co.uk/php_includes/RSS.php on line 95
Hannants http://alpha.hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72028 Flower Class Corvette 2 RN/RCN Reversible Wooden Life Raft.This super-detailed kit in etched brass and cast metal constructs the merchant shipping pattern of rectangular raft carried mostly on Canadian corvettes, often singly. These were fitted with internal tanks, which are included, for supplies of fresh water and condensed milk. Kit is also supplied with paddles and roping (designed to be used with Revell H.M.S. Snowberry (The Flower Class Corvettekits). Price:£11.00 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72028 Fri, 18 Mar 2022 20:04:46 GMT http://alpha.hannants.co.uk/product/GLSA72027 Flower Class Corvette 22" Bilge Keels The bilge keels on the Revell kit are complete works of fiction and these sets of replacement keels will rectify this. The corvettes were initially fitted with 11" keels but it was often said by crews that they would 'roll on wet grass', and in an attempt to limit this tendency many boats were fitted with 22" keels later on in the war. As can be appreciated, these much deeper keels required additional bracing by a further longitudinal back-plate and by angle section support struts, and these are all included in this set. (designed to be used with Revell H.M.S. Snowberry (The Flower Class Corvettekits). Price:£18.50 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72027 Thu, 10 Feb 2022 11:47:08 GMT http://alpha.hannants.co.uk/product/GLSA72026 Flower Class Corvette 11" Bilge Keels. The bilge keels on the Revell kit are complete works of fiction and this set of replacement keels will rectify this. The corvettes were initially fitted with these 11" keels and they apply to all the short forecastle vessels, as well as many long forecastle corvettes, as built. (designed to be used with Revell H.M.S. Snowberry (The Flower Class Corvettekits). Price:£11.25 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72026 Thu, 10 Feb 2022 11:45:42 GMT http://alpha.hannants.co.uk/product/GLSA72020B 4' 3' Pipe Rails - Etched - these are convincing 4-depth etched versions of our Rope Rails, for where strength is required and are a direct replacement fit to our cast versions above. These units are the deeper pipe rail units - for the piping around the bridge - Fret of 28 (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB and Revell H.M.S. Snowberry (The Flower Class Corvettekits). Price:£3.96 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72020B Sun, 31 Dec 2017 20:08:00 GMT http://alpha.hannants.co.uk/product/GLSA72025 Splinter Padding - pack of 24 Splinter Padding sections as fitted around corvette bridges and around gun installations and other areas on many other smaller vessels. These units are cast with detail on BOTH sides for your economy and to aid scale thickness when using in areas where padding sections might be added both inboard and outboard of pipe railed areas (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB and Revell H.M.S. Snowberry (The Flower Class Corvettekits). Price:£9.33 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72025 Fri, 03 Jun 2016 11:09:11 GMT http://alpha.hannants.co.uk/product/GLSA72024 H.M.S. Snowberry (The Flower Class Corvette) 16 Dinghy & Stowage Set - TWO Units This boxed kit provides TWO finely cast replacements in injection-resin for the inaccurate kit items + a host of fine parts in etched brass and cast metal to complete two super-detailed models. In addition - there is a complete set of cast and etched parts for the stowage equipment for the dinghies - the fit of which is matched to the locations provided in our Flower Class Corvette Deck and Fittings Set. This set will equip one Flower Class Corvette. (designed to be used with Matchbox and Revell kits). Price:£28.00 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72024 Fri, 18 Mar 2016 16:13:50 GMT http://alpha.hannants.co.uk/product/GLSA72023 H.M.S. Snowberry (The Flower Class Corvette) Sonar & Housing Set. This interesting kit offers something a little different for your Flower Class! It offers a detailed sonar dish & housing - the bottom fairing of which is visible just below the keel of the boat and just fwd. of the four inch gun. This model will make a really interesting side display for your Flower Class model. Extra detail is provided for the sonar dish in case you wish to display this removed from the housing. In addition the riveted screens for the housing are also supplied and these can be formed up to match the housing and displayed removed [each side of the housing framework] or fitted to it. (designed to be used with Revell Flower Class Corvette kits). Price:£8.58 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72023 Tue, 05 May 2015 08:33:32 GMT http://alpha.hannants.co.uk/product/GLSA72018B Rope Rails - Etched - these are convincing 4-depth etched versions of our Rope Rails, for where strength is required and are a direct replacement fit to our cast versions above. These units carry the main steel ropes that are present around the forecastle and engine room decks on most vessels, including corvettes - Fret of 28 - three to four packs would be required for most corvettes (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB and Revell H.M.S. Snowberry (The Flower Class Corvettekits). Price:£3.96 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72018B Fri, 04 Oct 2013 15:47:44 GMT http://alpha.hannants.co.uk/product/GLSA72052 2' Rocket Flare Launcher - this pack contains four of these units'as carried by virtually all Coastal Forces vessels (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£5.83 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72052 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72022 H.M.S. Snowberry (The Flower Class Corvette) Propeller and Rudder Set ' following requests from many of you, we are releasing this new set with a superb fully-detailed corvette propeller in pewter together with a resin rudder unit of correct shape and scale thickness (designed to be used with Revell Flower Class Corvette kits). Price:£10.50 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72022 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72030 Deck Planking - 214mm x 141mm - this sheet can be easily cut up as required to provide finely detailed planked areas as required - for decks and bridges etc. of many vessels. Note that this sheet is not required if using our Deck & Fittings Set (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB and Revell H.M.S. Snowberry (The Flower Class Corvettekits). Price:£15.17 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72030 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72051 Twin .303 Lewis Gun Set - this set contains two twin Lewis Gun assemblies with full magazine detail, mounts, shields and finely-etched gun sights (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£5.83 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72051 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72053 Holman Projector - this kit provides a super-detailed Mk.IIA version of this interesting but unsuccessful weapon that was, nonetheless, fitted to so many Coastal Forces vessels (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£5.83 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72053 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72063 18' Torpedo and Tubes Set - two resin tubes - each with separate cast front ends that can be fitted to portray either loaded or empty tubes. The tubes are supplied with many fine details and with the support framework that fits to the girder framework that is individual to the vessel you are fitting the tubes to. In addition, a spare torpedo round is supplied together with chocks for two torpedoes. Two sets will obviously be required for vessels fitted with four tubes. In addition, saddles are provided for the fitting of .303 Vickers GO Machine Guns or 2" Rocket Flare Projectors - both available in separate packs - see above (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£10.50 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72063 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72064 21' Torpedo and Tubes Set - two resin tubes - each with separate cast front ends that can be fitted to portray either loaded or empty tubes. The tubes are supplied with many fine details and with the support framework that fits to the girder framework that is individual to the vessel you are fitting the tubes to. In addition, a spare torpedo round is supplied together with chocks for two torpedoes. Also alternate saddles are provided for the fitting of .303 Vickers GO Machine Guns or 2' Rocket Flare Projectors - both available in separate packs - see above - (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£14.33 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72064 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72065 Type A Mine Set - this set provides four Type A ground-influence mines with fully-detailed chutes and deck location strips. These were usually carried in fours or eights on vessels that had been equipped for minelaying sorties. All the strapping and release gear is fully represented in this set (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£6.75 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72065 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72066 Moored Mine & Sinker Set - contains three complete units, each supplying super-detailed mines and their sinkers, together with the mine chutes and traps for these + deck location strips. Nine were usually carried on larger vessels such as Fairmiles that had been equipped for mine-laying sorties, whilst three or six were usually carried on smaller vessels that were fitted out for this role. All the securing chains & strapping are fully represented in these sets (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£14.33 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72066 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72067 Single Depth Charge & Chute Set - this set provides four single depth charge & chute units as carried on most Coastal Forces vessels. Sets can obviously be combined to fit out the larger boats. All the release gear is fully represented in this set, together with accurate mounting chocks (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£6.75 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72067 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72068 Chemical Smoke Apparatus & Smoke Float Set - this set provides eight standard and four smaller Mk.VI smoke floats + two of the later design of CSA [chlor-sulphonic acid] smoke units [up to two of these were carried per vessel] (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£6.75 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72068 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72070 Coastal Forces Guardrail Set - this big etched set provides a large quantity of both two & three rung guardrail stanchions with both fixed and moveable bases, so that that they can be fixed to your coastal forces vessels whatever the individual armament layout you have chosen for it. Also included are large quantities of thimble, lashing, spring hook and eye nut detail + mesh screens. All this provides for total versatility, enabling fully accurate guardrail layouts to be produced. A super-value set that will fit out one of the largest of coastal forces vessels and up to two of the smaller ones (designed to be used with Airfix Vosper Motor Torpedo Boat/MTB kits). Price:£16.66 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72070 Wed, 11 Sep 2013 14:27:39 GMT http://alpha.hannants.co.uk/product/GLSA72001 H.M.S. Snowberry (The Flower Class Corvette) Deck & Fittings Set - the set contains: completely new forecastle deck with full surface detail, rivetted side walling + locations for all of the other sets and kit parts you will add as assembly progresses. Overlays for the engne room and quarter-deck, with options for Snowberry & Bluebell. Bower and kedge anchors, hawse plates [2 styles], new anchor windlass kit. New rope reels, bollards and fairleads, most vents + details for kit versions that are used. Splinter screens [2 types], all breakwaters, new watertight hatches, jackstaff, lifebuoys & frames. New ward room skylight and other skylights, engine casing companionway, new engine room skylight kit - which can be made with open or closed shutters, new davit assemblies + many other fittings. Etched sheetage of over 800 x 280mm with many hundreds of parts and a large quantity of fine castings + colour-coded assembly instructions and photographic references (designed to be used with Revell Flower Class Corvette kits). Price:£140.17 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72001 Wed, 11 Sep 2013 14:27:38 GMT http://alpha.hannants.co.uk/product/GLSA72002 H.M.S. Snowberry (The Flower Class Corvette) Type `C' Bridge Set - this kit contains a replacement assembly for the Type `C' Bridge equivalent as fitted to Snowberry, Bluebell and others. Only one or two original kit parts are used in this super-detailed kit, which includes: new bridge supports, with choice of girder-work patterns, new Type 271 radar Installation with choice of lantern frameworks, new asdic control compartment, flag locker, life belt rack, voice pipes & much more. 598x142mm of etched sheetage + several fine castings (designed to be used with Revell Flower Class Corvette kits). Price:£53.92 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72002 Wed, 11 Sep 2013 14:27:38 GMT http://alpha.hannants.co.uk/product/GLSA72003 H.M.S. Snowberry (The Flower Class Corvette) Funnel & Mast Set - contains a new metal super-detailed scale-thickness mast unit with crow's nest, yard, mast lantern and aerial & stay fittings, plus a new fine scale ladder with correct number of rungs. Large rivetted wrap-around etched overlay for kit funnel, with new steam release pipe, ladder, whistle, siren, top frame and yard arm units + funnel stays. Finely etched details and mounts for kit boiler-room vents [those adjacent to funnel] (designed to be used with Revell Flower Class Corvette kits). Price:£19.16 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72003 Wed, 11 Sep 2013 14:27:38 GMT http://alpha.hannants.co.uk/product/GLSA72004 H.M.S. Snowberry (The Flower Class Corvette) 4' Gun Mark IX Breech Loading Gun, Incl. Base & Spare Shells - a very large set that includes: new gun bandstand with locations for fitting to our Deck & Fittings Set, with steps and rails, highly-detailed spare shell holders [with shells], complete new cast gun assembly, both square and rounded pattern gun shields with full rivet detail, internal bracing and sliding hatch and gunsight detail + three ammunition locker units - Over 290 parts (designed to be used with Revell Flower Class Corvette kits). Price:£21.96 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72004 Wed, 11 Sep 2013 14:27:38 GMT http://alpha.hannants.co.uk/product/GLSA72005 H.M.S. Snowberry (The Flower Class Corvette) 2' Rocket Flare Set [incl. Stowage Boxes] - a set of port and starboard rails that were fitted to the sides of the 4' gun shields on many corvettes later in the war. These are supplied with cast rockets and 4 rocket stowage boxes [two of which can be assembled open to show internal detail and the additional cast rockets that are supplied for these boxes] - (designed to be used with Revell Flower Class Corvette kits). Price:£11.00 sales@hannants.co.uk http://alpha.hannants.co.uk/product/GLSA72005 Wed, 11 Sep 2013 14:27:38 GMT