Cookies are small text files that are placed on your computer by
websites that you visit. They are widely used in order to make
websites work, or work more efficiently, as well as to provide
information to the owners of the site.
Here is a list of cookies this site uses:
Cookie name
Description
existing_user
Stores the email address used to previously log into the site, used to prefill forms like on the reset password screen
authchallenge
Authentication security checks
hcart
Stores the anonymous customer\'s cart token. If items are added to the card while not logged in, if you log in the items will be added to the customer\'s existing cart
hannants
Stores the session information while you remain on the site
pricer
Stores if the export or eu prices is selected on the catalogue page
hidefilter
Stores if the search filter panel is hidden or shown
AWSELB
Stores which server you\'re connected to so to access the same server while you navigate around the site
Messerschmitt Bf-109E-7 TROP S9+CS - 1/32 Suitable for Dragon, Hasegawa, HGW, Hobby 2000 kits.
The preparation of the surface prior to the application of the HGW Wet Transfer:
The HGW Wet Transfer technology has been tested on Gunze brand paints and preparations.
Carry out the test (not on the model), if you are applying to paint made by a different manufacturer.
We recommend to spray the surface with a glossy varnish in order to achieve a perfect result.
No matter whether you are applying the transfer onto paint or varnish, it is advisable to go over the surface using sandpaper of a grade from 6 000 to 8 000.
Naturally, it is also essential to ensure that the base is clean, grease-free and clear of dust.
You will need:
a scalpel,
sharp tweezers,
the Mr. Mark Softer product by Gunze,
a cotton bud and clean cloth.
Step by Step:
1. Cut out the required design using a sharp scalpel.
wet-transfers
2. Soak the base paper in warm water (approx. 20 sec).
wet-transfers
3. Remove the transfer from the base paper.
wet-transfers
4. Apply a layer of Mr. Mark Softer on the surface where you intend to apply the transfer.
wet-transfers
5. Place the transfer in the required position on the layer of Mr. Mark Softer.
wet-transfers
6. Carefully press out any excess liquid and bubbles. (Use the cloth and the cotton bud.)
wet-transfers
7. Ideally, leave it to dry for 6-8 hours.
wet-transfers
8. Carefully remove the transparent transfer film.
wet-transfers
9. Clean off any traces of transfer glue with a wet cloth.
Advanced Search 